You are here: Home > Hoses, Rubber & Plastic
Sort By:
Page of 1
7/64" I.D. Vacuum & Windshield Washer Tubing 25ft 5/32" I.D. Vacuum & Windshield Washer Tubing 25Ft 7/32" I.D. Vacuum & Windshield Washer Tubing 25Ft
Online Price: $13.69
Online Price: $14.89
Online Price: $16.65
7/64" I.D. Vacuum & Windshield Washer Tubing 25ft 5/32" I.D.Vacuum & Windshield Washer Tubing 25Ft 7/32" I.D. Vacuum & Windshield Washer Tubing 25Ft
Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 7/64"
  • Outside Diameter: 9/32"
  • Fits 1/8" Nipple
  • (1) 25 Foot Roll Per Package
    View Catalog Page
  • Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 5/32"
  • Outside Diameter: 5/16"
  • Fits 3/16" Nipple
  • (1) 25 Foot Roll Per Package
    View Catalog Page
  • Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 7/32"
  • Outside Diameter: 13/32"
  • Fits 1/4" Nipple
  • (1) 25 Foot Roll Per Package
    View Catalog Page
  • 1/8" I.D. 1/4" O.D. Clear Tubing 100ft 9/32" I.D. Vacuum & Windshield Washer Tubing 25Ft 7/64" I.D. Vacuum & Windshield Washer Tubing 50Ft
    Online Price: $21.46
    Online Price: $22.96
    Online Price: $24.24
    Clear Tubing 1/8 Id 1/4 Od 9/32" I.D. Vacuum & Windshield Washer Tubing 25Ft 7/64" I.D. Vacuum & Windshield Washer Tubing 50Ft
    Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 1/8"
  • O.D.: 1/4"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 59 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 9/32"
  • Outside Diameter: 15/32"
  • Fits 5/16" Nipple
  • (1) 25 Foot Roll Per Package
    View Catalog Page
  • Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 7/64"
  • Outside Diameter: 9/32"
  • Fits 1/8" Nipple
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • 3/16" I.D. 5/16" O.D. Clear Tubing 100ft 5/32" I.D. Vacuum & Windshield Washer Tubing 50Ft 7/32" I.D. Vacuum & Windshield Washer Tubing 50Ft
    Online Price: $25.81
    Online Price: $25.81
    Online Price: $26.64
    Clear Tubing 3/16 Id 5/16 Od 5/32" I.D. Vacuum & Windshield Washer Tubing 50Ft 7/32" I.D. Vacuum & Windshield Washer Tubing 50Ft
    Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 3/16"
  • O.D.: 5/16"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 51 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 5/32"
  • Outside Diameter: 5/16"
  • Fits 3/16" Nipple
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 7/32"
  • Outside Diameter: 13/32"
  • Fits 1/4" Nipple
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • 9/32" I.D. Vacuum & Windshield Washer Tubing 50Ft 1/4" I.D. 3/8" O.D. Clear Tubing 100ft 1/4" I.D. Fuel Line Hose 25ft
    Online Price: $30.34
    Online Price: $31.36
    Online Price: $33.12
    9/32" I.D. Vacuum & Windshield Washer Tubing 50Ft Clear Tubing 1/4 Id 3/8 Od 1/4" I.D. Fuel Line Hose 25FT
    Vacuum & Windshield Washer Tubing
  • Meets SAE J1037 Type 2 Specifications
  • EPDM Rubber
  • Inside Diameter: 9/32"
  • Outside Diameter: 15/32"
  • Fits 5/16" Nipple
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 1/4"
  • O.D.: 3/8"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 51 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 1/4" I.D. x 1/2" O.D.
  • Working Pressure: 50 P.S.I.
  • (1) 25 Foot Roll Per Package
    View Catalog
  • 3/16" I.D. Fuel Line Hose 25ft 5/16" I.D. 7/16" O.D. Clear Tubing 100ft 5/16" I.D. Fuel Line Hose 25ft
    Online Price: $33.21
    Online Price: $36.82
    Online Price: $36.91
    3/16" I.D. Fuel Line Hose 25FT Clear Tubing 5/16 Id 7/16 Od 5/16" I.D. Fuel Line Hose 25FT
    Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 3/16" I.D. x 13/32" O.D.
  • Working Pressure: 50 P.S.I.
  • (1) 25 Foot Roll Per Package
    View Catalog
  • Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 5/16"
  • O.D.: 7/16"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 48 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 5/16" I.D. x 9/16" O.D.
  • Working Pressure: 50 P.S.I.
  • (1) 25 Foot Roll Per Package
    View Catalog
  • 3/8" I.D. Fuel Line Hose 25ft 3/8" I.D. 1/2" O.D. Clear Tubing 100ft 1/2" I.D. 5/8" O.D. Clear Tubing 100ft
    Online Price: $36.91
    Online Price: $42.46
    Online Price: $53.46
    3/8" I.D. Fuel Line Hose 25FT Clear Tubing 3/8 Id 1/2 Od Clear Tubing 1/2 Id 5/8 Od
    Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 3/8" I.D. x 5/8" O.D.
  • Working Pressure: 35 P.S.I.
  • (1) 25 Foot Roll Per Package
    View Catalog
  • Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 3/8"
  • O.D.: 1/2"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 41 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 1/2"
  • O.D.: 5/8"
  • Wall Thickness: 1/16"
  • Maximum Suggested Working Pressure: 28 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    5/8" I.D. Black O.E.M. Heater Hose 50ft 3/8" Impact Tool Air Hose 25ft 1/4" I.D. Fuel Line Hose 50ft
    Online Price: $54.58
    Online Price: $56.33
    Online Price: $59.02
    5/8" I.D. Black O.E.M. Heater Hose 50ft 3/8" Impact Tool Air Hose 25ft 1/4" I.D. Fuel Line Hose 50FT
    Black O.E.M. Heater Hose
    Meets or exceeds SAE20R3 specifications. O.E.M. grade EPDM hose that withstands the abuse of corrosive additives, heat, cold, ozone, weather and abrasion
  • Inside Diameter: 5/8"
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • Impact Tool Air Hose
    Four spiral reinforced EPDM rubber construction offers superior durability and excellent flexibility. Limited oil resistance. Coupled with brass fittings. Maximum working pressure is 300 P.S.I.
  • Inside Diameter: 3/8"
  • 1/4" Male Pipe Thread Fittings
  • (1) 25 Foot Roll Per Package
    View Catalog Page
  • Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 1/4" I.D. x 1/2" O.D.
  • Working Pressure: 50 P.S.I.
  • (1) 50 Foot Roll Per Package
    View Catalog
  • 1/2" I.D. Black O.E.M. Heater Hose 50ft 5/16" I.D. Fuel Line Hose 50ft 3/4" I.D. Black O.E.M. Heater Hose 50ft
    Online Price: $61.88
    Online Price: $64.56
    Online Price: $70.21
    1/2" I.D. Black O.E.M. Heater Hose 50ft 5/16" I.D. Fuel Line Hose 50FT 3/4" I.D. Black O.E.M. Heater Hose 50ft
    Black O.E.M. Heater Hose
    Meets or exceeds SAE20R3 specifications. O.E.M. grade EPDM hose that withstands the abuse of corrosive additives, heat, cold, ozone, weather and abrasion
  • Inside Diameter: 1/2"
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • Fuel Line Hose
    (Not For Electronic Fuel Injection)
  • Meets the following O.E.M. Specifications:(GM: 6165-M) (SAE J30R7) (Chrysler MSEA219)
  • Auveco Fuel Line Hose is of the highest quality and meets all O.E.M. specifications. It has a special chemical resistant interior, a single braid, and a neoprene exterior for maximum life and durability. For temperature range from -29F to 257F.
  • Auveco Hose is designed for gas and diesel fuel lines (except Electronic Fuel Injection), emission control devices, and crankcase ventilation. In addition to the automotive applications, this hose is widely used on lawn mowers, marine motors, tractors and construction equipment to mention only a very few.
  • Size: 5/16" I.D. x 9/16" O.D.
  • Working Pressure: 50 P.S.I.
  • (1) 50 Foot Roll Per Package
    View Catalog
  • Black O.E.M. Heater Hose
    Meets or exceeds SAE20R3 specifications. O.E.M. grade EPDM hose that withstands the abuse of corrosive additives, heat, cold, ozone, weather and abrasion
  • Inside Diameter: 3/4"
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • 1/4" I.D. Electronic Fuel Injection Hose 10ft 5/16" I.D. Electronic Fuel Injection Hose 10ft 3/8" I.D. 5/8" O.D. Clear Tubing 100ft
    Online Price: $73.91
    Online Price: $81.22
    Online Price: $86.02
    1/4" I.D. Electronic Fuel Injection Hose 10ft 5/16" I.D. Electronic Fuel Injection Hose 10ft Clear Tubing 3/8 Id 5/8 Od
    Electronic Fuel Injection Hose
  • Meets or exceeds SAE 30R9 specifications.
  • Quality fluoroelastomer tube and CM cover handles virtually every fuel on the market.
  • Burst strength exceeds 900 PSI.
  • 180 PSI working pressure
  • Size: 1/4" I.D. x 1/2" O.D.
  • (1) 10 Foot Roll Per Package
    View Catalog
  • Electronic Fuel Injection Hose
  • Meets or exceeds SAE 30R9 specifications.
  • Quality fluoroelastomer tube and CM cover handles virtually every fuel on the market.
  • Burst strength exceeds 900 PSI.
  • 180 PSI working pressure
  • Size: 5/16" I.D. x 9/16" O.D.
  • (1) 10 Foot Roll Per Package
    View Catalog
  • Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 3/8"
  • O.D.: 5/8"
  • Wall Thickness: 1/8"
  • Maximum Suggested Working Pressure: 55 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
    3/8" I.D. Electronic Fuel Injection Hose 10ft 3/8" Impact Tool Air Hose 50ft 1/2" I.D. 3/4" O.D. Clear Tubing 100ft
    Online Price: $90.56
    Online Price: $92.13
    Online Price: $118.58
    3/8" I.D. Electronic Fuel Injection Hose 10ft 3/8" Impact Tool Air Hose 50ft Clear Tubing 1/2 Id 3/4 Od
    Electronic Fuel Injection Hose
  • Meets or exceeds SAE 30R9 specifications.
  • Quality fluoroelastomer tube and CM cover handles virtually every fuel on the market.
  • Burst strength exceeds 900 PSI.
  • 180 PSI working pressure
  • Size: 3/8" I.D. x 5/8" O.D.
  • (1) 10 Foot Roll Per Package
    View Catalog
  • Impact Tool Air Hose
    Four spiral reinforced EPDM rubber construction offers superior durability and excellent flexibility. Limited oil resistance. Coupled with brass fittings. Maximum working pressure is 300 P.S.I.
  • Inside Diameter: 3/8"
  • 1/4" Male Pipe Thread Fittings
  • (1) 50 Foot Roll Per Package
    View Catalog Page
  • Our tubing has a broad range of chemical resistance to acids,alkalies and solvents. Its ideal for use in industrial air pressure line applications, in the food industry (FDA approved), for potable water, and for various gases and chemicals. Not for use with gasoline.
  • I.D.: 1/2"
  • O.D.: 3/4"
  • Wall Thickness: 1/8"
  • Maximum Suggested Working Pressure: 41 PSI AT 70 F
  • 100 Feet Per Package
  • View Catalog Page
       
     
    fg