You are here: Home > Upholstery
Sort By:
Page of 1
250 Rubber Coated EK Clips 100 Lined BW-Clips 1/2" Width 7/8 Length 250 3 Prong Clips
Online Price: $10.68
Online Price: $12.01
Online Price: $12.11
250 Rubber Coated EK Clips 100 Lined BW-Clips 1/2" Width 7/8 Length 250 3 Prong Clips
  • EK Clips
  • 250 Per Package
  • Lined BW-Clips
  • Solid  steel construction
  • Lined in the inside
  • Used to attach zigzag springs, edge springs and torsion springs to border and edge wires.
  • Lined BW Clips won’t squeak.
  • Width: 1/2"
  • Length: 7/8"
  • Use With CSO522 BW Clip Pliers
  • 100 Per Package
  • High quality three prong clips for use with CSO445-3 Spring Clip Pliers.
  • 250 Per Package
  • Moulding Clip Tool 20mm Sharp Point Hog Rings - Copper Coated 20mm Blunt Point Hog Rings - Copper Coated
    Online Price: $12.91
    Online Price: $17.19
    Online Price: $17.56
    Moulding Clip Tool 20mm Sharp Point Hog Rings - Copper Coated 20mm Blunt Point Hog Rings - Copper Coated

    This clever tool installs and removes the plastic clips which hold moulding strips. Just press down and slide clip on or off. Helps avoid scratches on new finishes or injury to worker’s hand.

    A useful tool designed to save time and money.

    It makes this job so easy.

    Overall Length: 8-1/2"

    Copper coated hog rings. 14 wire gauge with sharp points.

    These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

    Approximate rings per box: 1,000

    Copper coated hog rings. 14 wire gauge with blunt points.

    These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

    Approximate rings per box: 1,000

    Revolving Punch - Nickel plated 25mm Sharp Point Hog Rings - Copper Coated Arch punch 1/4"
    Online Price: $17.95
    Online Price: $22.30
    Online Price: $25.17
    Revolving Punch - Nickel plated 25mm Sharp Point Hog Rings - Copper Coated Arch punch 1/4"

    A fine quality pressed steel frame revolving punch with drive tubes. All tubes are heat treated to give long wear.

    Furnished with tubes sizes: 0  (5/64”), 1 (3/32”), 2 (7/64”), 3 (1/8”), 4 (5/32”) & 6 (3/16”).

    Copper coated hog rings. 14 wire gauge with sharp points.

    These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

    Approximate rings per box: 1,000

    Arch punch 1/4"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 3/8" Arch punch 1/8" Arch punch 3/16"
    Online Price: $25.17
    Online Price: $25.44
    Online Price: $25.44
    Arch punch 3/8" Arch punch 1/8" Arch punch 3/16"
    Arch punch 3/8"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 1/8"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 3/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 5/16" Arch punch 7/16" Arch punch 1/2"
    Online Price: $25.44
    Online Price: $25.44
    Online Price: $30.38
    Arch punch 5/16" Arch punch 7/16" Arch punch 1/2"
    Arch punch 5/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 7/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 1/2"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Cutting Pad Arch punch 5/8" BW Clip Pliers
    Online Price: $32.95
    Online Price: $35.30
    Online Price: $35.40
    Cutting Pad Arch punch 5/8" BW Clip Pliers

    Made with a special formula of resilient vinyl, these tough cutting pads are designed for use with punches. They are long wearing and can be used on both sides. Cutting pads should be used on a solid base for best results. The semi-self healing surface absorbs cuts and helps prevent damage to the cutting edge of the punch.

    It can be used on both sides for longer durability.

    Size:10" x 10" x 3/8"
    Arch punch 5/8"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    This sturdy quality tool is specially designed for rapid closing of 1/4 “ cushion spring (two 8 gauge wire) clips. Contoured handle with vinyl grips provide comfort and firmness.
    Hog Ring Pliers Open Spring Arch punch 9/16" Arch punch 11/16"
    Online Price: $36.20
    Online Price: $36.38
    Online Price: $36.38
    Hog Ring Pliers Open Spring Arch punch 9/16" Arch punch 11/16"
    Hardened and tempered. Forged steel. Vinyl handles. Closing spring loaded. Works with hog rings series 773. It can also close hog rings series 1442 & 1443 & 1444. Ideal for closing around small areas.
    Overall Length: 7-1/8"
    Arch punch 9/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 11/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 3/4" Arch punch 7/8" Arch punch 13/16"
    Online Price: $37.18
    Online Price: $41.51
    Online Price: $41.94
    Arch punch 3/4" Arch punch 7/8" Arch punch 13/16"
    Arch punch 3/4"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 7/8"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 13/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 1" Arch punch 15/16" Spring Clip Pliers
    Online Price: $45.65
    Online Price: $46.14
    Online Price: $77.53
    Arch punch 1" Arch punch 15/16" Spring Clip Pliers
    Arch punch 1"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
    Arch punch 15/16"

    Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

    Original and correct design for cutting. Meet government standards.

    These punches should be used on a CSO603 Cutting pad. The use of a wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

    Nickel plated.

    A special plier used for applying edge wire clips to edge wire and springs.  

    This pliers set our 3 prong clips CSO4450-3.

       
     
    fg